Epoxy Garage Floor Coating Steps
Posted: Friday, November 20, 2009
by Anthony Davis
Installing an epoxy garage floor coating isn't very hard at all, but it can be trying if you are not of sound body. If you plan to do the install yourself, then your first question should be: will I be able to spend hours bent over? If the answer is no, then you'll want to either plan to have someone else install your epoxy garage floor coating, or go a different route altogether.
If you do decide that you want to apply your epoxy garage floor coating by yourself, then read on for a very fast rundown on exactly what you will have to do to apply your coating. Keep in mind, though, that anything you read either here, or anywhere else on the web, should be considered a rough guide only. Always follow the directions included with your epoxy garage floor coating kit to the letter. If you don't, you may end up with a mess for your garage flooring.
Picking Your Epoxy Garage Floor Coating Kit
Deciding, then picking up the epoxy garage floor coating kit of your choice is your obvious first step. As this is something that really can't be damaged in transit, buying epoxy online is a really good way to pinch some pennies. If you've never done anything like this before, definitely try to get a kit that has a DVD for instructions. They generally don't cost any more than those without, it's just an added feature that some companies put in their kits. If color is important to you, be picky. With all of the options out there, there's no reason to settle, especially since an epoxy garage floor coating will probably last decades. Most people don't put their garage flooring on their grand tour of the house, but there's no reason to be embarrassed by it.
Getter The Garage Ready For Epoxy Garage Floor Coating
After you've got your kit in hand, it's time to clean the concrete garage floor. Most epoxy garage floor coating kits can be installed over the top of an existing coat, if one exists. Again, refer to the instructions for your kit. If that's not an option, or if your existing paint is damaged, sanding down to the concrete garage floor might be a better idea.
Installing Your Epoxy Garage Floor Coating
The instructions in most kits will begin with the mixing. After the concrete garage floor is cleaned up, mixing will likely be your next step. Follow your directions to the letter since a mistake in the mixing can foul up the whole thing. Mixing is generally not difficult, but since this is the foundation of everything else, pay very close attention. Before you start, read the whole of the instructions a few times over; you'll be glad you did. After the epoxy is on the floor, the color flakes, should they be present and you choose to use them, will come next. They are in no way necessary, and will not help protect your floor, but they do add some color. After the specified amount of drying time, the paint itself goes down. If everything has been done right by this point, it's just a matter of waiting for the garage floors to dry, and they'll be all shiny and professional looking!
For more information on installing an epoxy garage floor coating, check out Sweet Garage Floor.
This Article has been viewed 149 times. (Not updated in real-time.)
No comments yet.We want your comments! If you can read this, you don't have javascript enabled, so you can't use this comment system. Please enable javascript.